Towing Recognition Control Module -J345-, REMOVING AND INSTALLING, SEDAN: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the left luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Manual trailer hitch: disconnect the connectors -1 and 2-.
-- Release the retaining tab in direction of -arrow- and remove the towing recognition control module -3- from the frame -4-.
-- Electric trailer hitch: disconnect the connectors -1, 2 and 3-.
-- Open the tab -arrow- and remove the towing recognition control module -4- from the frame -5-.