Overview - Roof Railing
WARNING: This page is about a different variant/trim than selected.
- Nut
- Install with locking compound. Refer to the Parts Information for the locking compound.
- Tightening sequence. Refer to Fig 1.
- Quantity: 4
- Lifter
- Removing and installing. Refer to LIFTER, REMOVING AND INSTALLING
- Quantity: 4
- Stop Washer
- Replace if damaged
- Quantity: 4
- Adjusting Screw
- 0.5 Nm
- Quantity: 4
- Install with locking compound. Refer to the Parts Information for the locking compound.
- Roof Railing
- Removing and installing. Refer to ROOF RAILING, REMOVING AND INSTALLING
Roof Railing - Tightening Specification and Sequence
-- Tighten the nuts to 10 Nm in the sequence -2, 3, 4 and 1-.