LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> A3 Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Bumpers) >> 63 Bumpers >> Rear Bumper >> Attachments, Removing And Installing >> Wheel Housing Extension, Removing And Installing >> Removing

Wheel Housing Extension, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the rear wheel housing liner. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .

Sportback:

GWWA63-11089Courtesy of AUDI OF AMERICA, LLC

-- Remove the screw -1-.

-- Remove the expanding rivet -2-.

-- Remove the wheel housing extension -3-.

Sedan:

GWWA63-11370Courtesy of AUDI OF AMERICA, LLC

-- Remove the screw -1-.

-- Carefully warm the wheel housing extension -2- using the :VAS1978/14A  .

-- Loosen the trim panels -arrows- and remove the wheel housing extension.