Overview - Bumper Cover, A3 Through My 2016
WARNING: This page is about a different variant/trim than selected.
- Bumper Cover End Plate
- Removing and Installing. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING, A3 THROUGH MY 2016 .
- Bolt
- 2.5 Nm
- Air Intake Grille
- Removing and Installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, A3 WITHOUT SIDE AUXILIARY RADIATOR, THROUGH MY 2016 .
- Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Mount
- For metal nut
- Metal Nut
- Bolt
- 4 Nm
- Mount
- For fog lamp
- Equipped on some models
- Removing and Installing. Refer to FOG LAMP MOUNT, REMOVING AND INSTALLING .
- Bolt
- 4.5 Nm
- Washer Nozzle Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .