Overview - Bumper Cover, A3 From My 2017
WARNING: This page is about a different variant/trim than selected.
- Bolt
- 2.5 Nm
- Bumper Cover End Plate
- Removing and Installing. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING, A3 FROM MY 2017, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
- Center Air Intake Grille
- Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A3 S LINE FROM MY 2017 .
- Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Towing Eye Cover
- Mount
- Bolt
- 4 Nm
- Mount
- For the bumper cover
- To secure the headlamp
- Overview. Refer to OVERVIEW - FENDER .
- Bolt
- Tightening specification. Refer to OVERVIEW - FENDER .
- Bolt
- 4.5 Nm
- Washer Nozzle Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
- Air Intake Grille
- Removing and Installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, VEHICLES FROM MY 2017 .
- Bolt
- 4.5 Nm
- Quantity: 3