Windshield Wiper Arm, Removing And Installing: Removing

-- Turn on the ignition.

-- Activate "rear wipe" and let the wiper arm run to end position.

-- Turn off the ignition.

-- Vehicle equipment version with mechanical ignition switch: Remove the key.

-- Vehicle equipment version with electronic ignition switch: Remove the key from the vehicle.

-- Carefully expand the cap in direction of -arrows- and remove.

Fig 1: Identifying Cover

Courtesy of AUDI OF AMERICA, LLC

-- Carefully remove the spray nozzle -2-.

Fig 2: Identifying Spray Jets And Hex Head Nuts

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the nut -1- one turn.

-- Install an M6 nut -4- on the nut.

Fig 3: Position The Puller T10369/1 On The Wiper Arm

Courtesy of AUDI OF AMERICA, LLC

-- Position the : T10369/1  on the wiper arm -1- as illustrated.

-- Position the thrust piece -2- on the wiper axle.

-- Rotate the bolt -3- clockwise until the wiper arm is removed from the axle.

-- Remove the nuts and remove the wiper arm.