Spray Nozzles, Removing And Installing, Without Side Auxiliary Cooler: Removing

-- Remove the left front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Place a drip tray under the windshield washer fluid reservoir.

-- Remove the cover for the headlamp washer system spray nozzle. Refer to OVERVIEW - BUMPER COVER .

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Free up the washer fluid hose -5- at the brackets -4- on the bumper cover and remove it with the spray nozzles -3-.

Vehicles through MY 2016 

-- Clamp off the windshield washer fluid hose -1- with the : 3094  .

Fig 1: Clamping Off Washer Fluid Hose

Courtesy of AUDI OF AMERICA, LLC

-- Carefully warm the washer fluid hose -1- using the : VAG1416  and remove it from the spray nozzle -2- in direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

Vehicles from MY 2017 

Courtesy of AUDI OF AMERICA, LLC

-- Place the drip tray under the washer nozzle -1-.

-- Remove the washer fluid hose -2- by pressing the release buttons in the direction of -arrows-.

-- Seal off the hose coupling with clean plugs from the : VAS6122  .