LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> A3 Premium >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head, VALVETRAIN [CZRA] [Convertible] (1 Of 2) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Lower Timing Chain Cover, Replacing >> Removing

Lower Timing Chain Cover, Replacing: Removing

-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Remove the engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .

-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Remove the ribbed belt tensioner. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

-- Free up the clip -2- for the wiring harness.

Fig 1: Identifying Oil Dipstick Guide Tube
GWWA17-10824Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- If necessary, unclip the oil dipstick tube from the upper timing chain cover -arrow-.

-- Disconnect the connector -1- for the Oil Pressure Regulation Valve -N428-.

Fig 2: Identifying Oil Pressure Regulation Valve
GWWA17-10826Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 15-.

Fig 3: Lower Timing Chain Cover Tightening Sequence
GWWA15-10397Courtesy of AUDI OF AMERICA, LLC

-- Remove the lower timing chain cover from the bonding.