Engine Support, Removing And Installing: Removing

-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Lift the engine using the : 10-222A/11  -1- to dimension -a-.

Fig 1: Identifying Engine Support Bridge - Spindle 10 - 222 A /11

Courtesy of AUDI OF AMERICA, LLC

• Dimension -a- = approximately 30 mm.

-- Remove the bolts -1, 2 and 3- and the engine support.

Fig 2: Engine Support - Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC