Balance Shaft, Removing And Installing, Exhaust Side: Installing

Courtesy of AUDI OF AMERICA, LLC

-- Check the installation position of the pipe for the balance shaft. Refer to Figure.

-- Grease the bearing and bearing track -arrows- from the exhaust side balance shaft with engine oil.

-- Turn the balance shaft in the installation position.

• The semi-round ring bearing contact surface must point upward.

-- Insert the exhaust side balance shaft and tighten the bolt -1-.

Fig 1: Identifying Intake Camshaft Balance Shaft

Courtesy of AUDI OF AMERICA, LLC

Further installation is performed in reverse order of removal, while noting the following:

-- Install the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .