Bumper Cover End Plate, Removing And Installing, Vehicles From My 2017: Removing

-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the wheel housing liners. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Disconnect the connector -3- and free up the central connector on the retainer.

Courtesy of AUDI OF AMERICA, LLC

-- Free up the left and right washer fluid hose -1- and wiring harness -2-.

-- Remove the bolt -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the catches -arrows- and at the same time remove the end panel -2- from the front bumper cover -1- in the direction of travel toward the rear.