LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S7 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Rear Final Drive 0BF & 0BE - Sport Differential - General & Technical Data) >> 00 General, Technical Data >> Specifications >> Engine Codes, Transmission Allocations, Ratios And Capacities >> Transmission Allocations, Ratios And Capacities (For A6/A7 Sedan)

Transmission Allocations, Ratios And Capacities (For A6/A7 Sedan)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Rear Final Drive   0BF
Code letters   MKU    
Ratio Final drive Z2 : Z1 37 : 9 = 4.111    
Driveshaft flange diameter   75.5 mm    
Gear oil capacity
  • For the final drive (differential and pinion)
  • No change interval
Gear oil specification
ATF capacity
  • For the hydraulic control unit and chambers
  • No change interval
ATF specification