ATF In Rear Final Drive 0BF And 0BE, Draining
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Catch Tray.
Rear Final Drive 0BF
-- Remove the plug so that the ATF can drain faster -arrow-.
-- Remove the ATF drain plug -arrow- and drain the ATF.
-- Install and tighten the new the ATF drain plug -arrow-. Tightening specification REAR FINAL DRIVE OVERVIEW => List Item:ATF Drain Plug.
Rear Final Drive 0BE
-- Remove the ATF inspection plug so that the ATF can drain faster -1-.
-- Remove the ATF drain plug -2- and drain the ATF.
-- Install and tighten the new ATF drain plug -2-. Tightening specification REAR FINAL DRIVE OVERVIEW => List Item:ATF Drain Plug.
Continuation for All Rear Final Drives
-- Fill the ATF in the rear final drive. Refer to ATF IN REAR FINAL DRIVE 0BF AND 0BE, FILLING .