Tightening Specifications

-- Tighten the bolts -1- in three steps:

Step	M8 or M10 Bolts	Tightening Specification/Additional Turn
1.	-1-	Next to the color dot 30 Nm ¹⁾
2.	-1-	Next 30 Nm
3.	-1-	All round 90° additional turn
¹⁾ By doing this, the CV joint is pushed slightly to the opposite side and imbalance is avoided.

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -arrows- to 24 Nm.