Selector Shaft Seal, Replacing
WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
NOTE:
The selector shaft seal can only be replaced for removed transmissions.
-- Remove the transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING .
-- Replace The Selector Shaft Seal. Refer to SELECTOR SHAFT SEAL, REPLACING .
-- Checking. Refer to ATF LEVEL, CHECKING after installing the transmission.