Engine, Removing: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Engine Sling:2024A
- Engine Support Bridge:10-222A
- Engine/Gearbox Support Shackle (2 pc.):10-222A/12
- Pry Lever:80-200
- Shop Crane:VAS6100
- Engine Bung Set:VAS6122
- Shop Crane - Drip Tray:VAS6208
- Hose Clip Pliers:VAS6362
- Engine and Gearbox Jack:VAS6931
- Locking Pin:T10060A for vehicles with electromechanical power steering
- Engine/Gearbox Jack - Gearbox Support:T10337
- Belt Tensioner Locking Tool:T40098 for vehicles with hydraulic power steering
- Reversing Light Switch Connector Release Tool:T40138
- Puller - Sender Wheel 1: T40132
- Slide Hammer Set - Adapter 40:VW771/40
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview And Parts Information Prior To Starting Procedure.
Mandatory Replacement Parts
- Bolts - Engine mount
- Bolts - Support
- Bolts- Engine to transmission
- O-rings - Refrigerant lines
- O-rings - Transmission lines