;Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes

Special Tools And Workshop Equipment Required

Puller - Valve Seal:3364
Seal Installer - Valve Stem:3365 or (depending on the version/manufacturer of the valve stem seal) Fitting Tool:T40376/1
Valve Keeper Tool Kit:VAS5161A with the Valve Cotter Tool Kit - Guide Plate 19c :VAS5161/19C
Engine and Gearbox Bracket VAS6095A:VAS6095A
Cylinder Head Tensioning Device:VAS6419
Mounting Sleeve. Refer to Parts information

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.

Mandatory Replacement Parts