LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S4 Prestige >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head, VALVETRAIN [CVKB, DBPA, CWNA, CVLA, DEMA, DHDA, DKUA] >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Upper Timing Chain Cover, Removing And Installing >> Installing

Upper Timing Chain Cover, Removing And Installing: Installing

Install in reverse order of removal and Note The Following: 

NOTE:

Replace the seals and O-rings after removal.

-- Coat the seals and the O-rings with engine oil.

-- Install the camshaft adjustment valves. Refer to CAMSHAFT ADJUSTMENT VALVE 1 -N205- / EXHAUST CAMSHAFT ADJUSTMENT VALVE 1 -N318-, REMOVING AND INSTALLING .

Additional procedures depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING [CVKB, DBPA, CWNA, CVLA, DEMA, DHDA] .

scientia non olet · About LEMON Manuals