LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S4 Prestige >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head, VALVETRAIN [CVKB, DBPA, CWNA, CVLA, DEMA, DHDA, DKUA] >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Overview - Timing Chain Cover >> Lower Timing Chain Cover - Tightening Specifications And Sequence

Lower Timing Chain Cover - Tightening Specifications And Sequence

Fig 1: Identifying 15 Bolt Timing Chain Lower Cover Bolt Tightening Sequence
GWWA15-10397Courtesy of AUDI OF AMERICA, LLC
NOTE:

Replace the bolts that were tightened with an additional turn after removing them.

-- Tighten the bolts in the steps shown in the sequence:

Step Bolts Tightening Specification/Additional Turn
1. -1 to 15- Install by hand all the way
2. -1 to 15- 8 Nm
3. -1, 2, 4, 5- and -7 to 15- 45° additional turn
4. -3 and 6- After installation of the vibration damper a 45° additional turn
scientia non olet · About LEMON Manuals