Bearing Bracket, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

-- Install the screws -arrows- and tighten. Tightening specification -item  ) OVERVIEW - CYLINDER HEAD - BOLT.

-- Coat the holes -arrows- with engine oil.

Courtesy of AUDI OF AMERICA, LLC

-- Check if the adapter sleeve -1- is installed.

Fig 1: Loosening Sequence Of Control Valve

Courtesy of AUDI OF AMERICA, LLC

-- Attach the bearing mount and install the bolts -1 to 6- all the way by hand.

-- Remove the :T40267  .

-- Tighten the bearing bracket bolts. Refer to Figure.

Installation Is Performed In Reverse Order Of Removal, Noting The Following: 

-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

• Refer to Figure
• Refer to OVERVIEW - CAMSHAFT TIMING CHAINS 
• Refer to OVERVIEW - CYLINDER HEAD