LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Controls, Housing [Servicing - 7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DN, 0DP]) >> 34 Controls, Housing >> Transmission, Disassembling And Assembling >> Transmission, Disassembling And Assembling >> Gear Actuator Module And Hydraulic Pressure Reservoir, Removing And Installing >> Procedure

Gear Actuator Module And Hydraulic Pressure Reservoir, Removing And Installing: Procedure

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic  mode and start the diagnostics.

-- Select the Test plan  tab.

-- Select individual test  button and select the following tree structure one after the other: