Dual Clutch, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Shop Crane :VAS6100
- Dual Clutch Lifting Device :T40123A and Dual Clutch Lifting Device - Sleeve :T40123A/2
- Pressure Stand :T40099
- Guide Pins - Gearbox :T40288
- Engine Support Bridge - Additional Hooks (2 pc.) :10-222A/2
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolt - Dual clutch
- Bolt - Clutch slave cylinder
- Double shaft seal - Input shaft