Check The Clutch Installation Height
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Before installing the clutch the dimension -x- must be determined.
- To do so use the :T40100 and :VAS6087 to determine the height of the clutch cover to the hub offset as shown.
The dimension -x- must be located within the tolerance of 98.91 to 99.61 mm.
NOTE:
If the dimension -x- is outside of the tolerance, the clutch must be replaced because it is damaged.