Rear Brake Caliper, Replacing: Notes
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50 Nm :VAG1331
- Brake Pedal Actuator:VAG1869/2 .
- Bleeder bottle from the Brake Charger/Bleeder Unit:VAS5234
- M10 plug or M12 from the Assembly Part Set:5Q0 698 311
- Lithium Grease:G 052 150 A2 . Refer to the Parts Information.
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview Prior To Starting Procedure.
Mandatory Replacement Parts
- Seal - Electro-Mechanical Parking Brake Motor to Brake Caliper
- Bolts - Brake Caliper to Brake Carrier
NOTE:
The brake caliper is removed and disconnected from the hydraulic system in the following description. The brake hose is removed.