Emergency Release From P, AUDI TT: Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the selector lever into "D/S" position.
-- Switch the ignition off.
-- Pull the parking brake button to activate the electro-mechanical parking brake.
-- Unclip the selector lever boot on both sides using the : 3409 in direction of -arrows- and fold it upward.
-- Release the catches -2- and remove the selector lever transmission range position display unit -1- upward.
-- Disconnect the connector -3-.
-- For example, release the Shift Lock Solenoid -N110- -1- in direction of -arrow- using a screwdriver and hold it in this position.
- The solenoid releases the selector lever.
-- When the solenoid is released, press the button in the selector lever handle and move the selector lever out of "P".
- If the selector lever is shifted back into "P", the Shift Lock Solenoid -N110- will mechanically lock the selector lever in the "P" position again. The solenoid must be released again.