LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (CYLINDER HEAD, VALVETRAIN (4-Cylinder 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Cam Adjustment Actuator, Removing And Installing >> Removing

Cam Adjustment Actuator, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

GWWA15-11794Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the cam adjustment actuator.

scientia non olet · About LEMON Manuals