Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the O-ring.
-- An adaptation must be performed after replacing or removing and installing the Camshaft Adjustment Valve 1 -N205-. Use the Vehicle Diagnostic Tester under Guided Functions , 01 - Adapting the electric actuator with feedback .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .