Lower Toothed Belt Guard, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Fig 1: Locating Toothed Belt Guard Tab

Courtesy of AUDI OF AMERICA, LLC

If a new toothed belt guard is installed, the guide tabs -arrow - must be disconnected before installing.

-- Position the toothed belt guard, pay attention to the alignment pins -arrow- while doing so.

Fig 2: Locating Alignment Pins

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the toothed belt guard.