Sliding Bar Ball, Installing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2018 Audi A3 Quattro, 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, and 2016 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Camshaft Spacer: T40191

Fig 1: Camshaft Spacer T40191
Courtesy of AUDI OF AMERICA, LLC
Protective Eyewear

Installing

CAUTION:

Risk of injuring the eyes due to the sliding bar ball springing out.

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

Fig 2: Inserting Spring And Ball Into Camshaft

Courtesy of AUDI OF AMERICA, LLC

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in the direction of -arrow A- using the Camshaft Spacer: T40191/1 and hold in place.

-- Push the sliding bar -3- in the direction of -arrow B-.