LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 339 (Cylinder Head, VALVETRAIN 2.0L (CNSB, CNTC, CYFB)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Camshaft Timing Chain, Removing And Installing >> Removing

Camshaft Timing Chain, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2018 Audi A3 Quattro, 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, and 2016 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Vehicles with a left auxiliary radiator: remove the washer fluid reservoir. Refer to WINDSHIELD WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .

All additional procedures are described. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals