Engine Cover, Removing And Installing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2018 Audi A3 Quattro, 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, and 2016 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.
Removal, Version 1:
-- Carefully pull the engine cover off the retaining pins one after the other in direction of -arrows-. Do not pull sharply on the engine cover or pull it to one side.
Removal, Version 2:
-- Carefully pull the engine cover off the retaining pins one after the other in direction of -arrows-. Do not pull sharply on the engine cover or pull it to one side.
Installing
-- To prevent damage to the engine cover, do not hit it with a fist or a tool.
-- Position the engine cover while paying attention to the oil filler tube and oil dipstick.
-- Press the engine cover into the rubber grommets on the left side first, then into the ones on the right side.