Intermediate Sprocket - Tightening Specifications And Sequence
WARNING: This page is about a different car, the 2017 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the bolts that were tightened with an additional turn after removing them.
-- Tighten the bolt in steps:
| Step | Tightening Specifications/Additional Turn |
|---|---|
| 1. | 10 Nm |
| 2. | -- Turn the intermediate sprocket
|
| 3. | 25 Nm |
| 4. | 90° additional turn |