Wheel Bearing Unit, Removing And Installing, Multi-Link Suspension Vehicles With Front Wheel Drive: Notes
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Puller - Grease Cap :VW637/2
- Camshaft Installer Kit - Sleeve :3241/4 from the Seal Installer - Camshaft Installer Kit :3241
- Torque Wrench 1332 40-200 Nm :VAG1332
- Torque Wrench 1410 :VAG1410
- Socket - Xzn 18mm :T10162A
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolt - Wheel Bearing Unit to Wheel Bearing Housing
- Bolt - Wheel Bearing Unit to Stub Axle
- Dust Cap
WARNING:
There is a risk of breaking the tool number :T10162 without the "A" index.
- :T10162A must be used exclusively.