LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Rear Suspension -- (A3 Cabriolet / Sedan)) >> 42 Rear Suspension >> Wheel Bearing And Trailing Arm >> Wheel Bearing Housing Bonded Rubber Bushing, Replacing >> Removing >> Pressing Out Bonded Rubber Bushing

Pressing Out Bonded Rubber Bushing

WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA42-10684Courtesy of AUDI OF AMERICA, LLC
  1. :3346/3 
  2. :3390 
  3. Wheel Bearing Housing
  4. :3350 
  5. Thrust Piece from the :3301 
  6. :3346/3 
  7. :3346/2 

-- Remove the bonded rubber bushing by turning the :3346/3  -6 -. If necessary, counterhold on the :3346/2  -7-.

scientia non olet · About LEMON Manuals