Overview - Trailing Arm: Notes

WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Trailing Arm

Courtesy of AUDI OF AMERICA, LLC

Cover
Bracket
Bolt
- 50 Nm + 45°
- Always replace if removed
Bolt
- 90 Nm + 90°
- Always replace if removed
Bolt
- 70 Nm + 90°
- Always replace if removed
Bolt
- 70 Nm + 90°
- Always replace if removed
Bolt
- Tightening specification. Refer to OVERVIEW - COMPONENT LOCATION (1 Of 2) ABS / OVERVIEW - COMPONENT LOCATION (2 Of 2) ABS .
Right Rear ABS Wheel Speed Sensor -G44- /Left Rear ABS Wheel Speed Sensor -G46-
- Removing and installing. Refer to OVERVIEW - COMPONENT LOCATION (1 Of 2) ABS / OVERVIEW - COMPONENT LOCATION (2 Of 2) ABS .
Wheel Bearing Housing
- For FWD vehicles
Wheel Bearing Housing
- For AWD vehicles
Trailing Arm
- Removing and installing. Refer to TRAILING ARM WITH MOUNTING BRACKET, REMOVING AND INSTALLING .
Bonded Rubber Bushing
- Note installed position. Refer to OVERVIEW - TRAILING ARM
- Replacing. Refer to TRAILING ARM, SERVICING .