Stabilizer Bar, Removing And Installing, Multi-Link Suspension Vehicles With Front Wheel Drive: Removing
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- All except A3 cabriolet: remove the center muffler with the rear muffler or the rear muffler and move to the side. Refer to OVERVIEW - MUFFLER [CNTC] / OVERVIEW - MUFFLER [CZRA] .
-- Remove the nut -1- from the coupling rod -2-.
-- Remove the coupling rod -2- from the stabilizer bar -3-.
-- A3 cabriolet: remove the right spring. Refer to SPRING, REMOVING AND INSTALLING, MULTI-LINK SUSPENSION .
-- Remove the bolts -arrows- for the stabilizer bar -1-
-- Remove the stabilizer bar to the right from the subframe -2-.