Turbocharger - Tightening Specifications And Sequence
WARNING: This page is about a different car, the 2017 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of AUDI OF AMERICA, LLC
- Replace the nuts after removing.
-- Tighten the bolts in steps in the sequence shown:
| Step |
Nuts |
Tightening Specifications |
| 1 |
-1 and 2- |
10 Nm |
| 2 |
-3 and 4- |
25 Nm |
| 3 |
-1 and 2- |
25 Nm |