LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (TURBOCHARGER, SUPERCHARGER [4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engin] -- (A3)) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING >> Removing

Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2017 Audi S3, 2016 Audi S3, 2016 Audi A3, 2015 Audi S3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to NOISE INSULATION .

-- Disconnect the connector -2-.

GWWA21-10817Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1- and remove the Charge Air Pressure Sensor -G31- from the air duct pipe.

scientia non olet · About LEMON Manuals