Ribbed Belt, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
CAUTION:
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
-- Mark the running direction using chalk or a felt-tip pen.
-- Turn the tensioner in direction of -arrow- to release the tension on the ribbed belt.
-- Secure the tensioner using the :T10060A .
-- Remove the ribbed belt.