LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Wheels, Tires, Wheel Alignment (Suspension, Wheels, Steering) -- (A3)) >> 44 Wheels, Tires, Wheel Alignment >> Vehicle Alignment >> Rear Axle Toe, Adjusting >> Vehicles With Multi-Link Suspension - Rear Axle Toe >> Procedure

Vehicles With Multi-Link Suspension - Rear Axle Toe: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi A3 Quattro, 2016 Audi A3, and 2015 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the nut -A- on the lower control arm threaded connection from the subframe and loosely install a new nut.

GWWA44-10277Courtesy of AUDI OF AMERICA, LLC

-- Adjust toe by turning eccentric screw -B-.

NOTE:

The maximum adjustment range is 90° to left or right of center position.

-- Tighten the nut -A-.

-- After the nut -A- is tightened, check the toe value once more. Refer to AXLE ALIGNMENT SPECIFIED VALUES .

scientia non olet · About LEMON Manuals