Overview - SUBFRAME Mount
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The illustration show the assembly mounts in a vehicle with a TDI engine.
- 1 - Bolt
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] .
- 2 - Engine Support
- Removing and installing. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 3 - Engine Mount
- With support arm
- Removing and installing. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 4 - Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 5 - Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 6 - Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 7 - Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 8 - Pendulum Support
- Removing and installing. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 9 - Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 10 - Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 11 - Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 12 - Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 13 -Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 14 - Transmission Mount
- With support arm
- Removing and installing. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 15 - Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT [CNTC] / OVERVIEW - SUBFRAME MOUNT [CZRA] ..
- 16 - Bolt
- 40 Nm +90° turn
- Always replace after removing
- 17 - Transmission Support
- 18 - Bolt
- 40 Nm +90° turn
- Always replace after removing