Overview - Bevel Box
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification -item 3- OVERVIEW - DIFFERENTIAL
- Heat Shield
- For drive axle
- Bolt
- Tightening specification. Refer to DRIVE AXLE
- Bolt
- Tightening specification. Refer to the appropriate service information. .
- Heat Shield
- For drive axle
- Bolt
- Tightening specification. Refer to the appropriate service information. .
- Bevel Box
- Removing. Refer to BEVEL BOX, REMOVING
- Installing. Refer to BEVEL BOX, INSTALLING
- Bolt
- Tightening specification. Refer to the appropriate service information.
- Always replace after removing
- Bracket
- For bevel box
- Different versions.
- Bolt
- Tightening specifications and sequence:
- Vehicles with a TFSI engine. Refer to the appropriate service information.
- Vehicles with a TDI engine. Refer to the appropriate service information.
- Tightening specifications and sequence:
- Bolt
- Tightening specifications and sequence:
- Vehicles with a TFSI engine. Refer to the appropriate service information.
- Vehicles with a TDI engine. Refer to the appropriate service information.
- Tightening specifications and sequence: