LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (CONTROLS, HOUSING (0D9) (1 Of 2) -- (A3)) >> 34 Controls, Housing >> Bevel Box >> Bevel Box, Installing >> Procedure

Bevel Box, Installing: Procedure

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

CAUTION:

Risk of damaging sealing ring between transmission and bevel box.

  • Place bevel box on transmission together with right flange shaft while turning shaft.

-- Tighten bevel box on transmission.

-- Install the driveshaft. Refer to the appropriate service information. .

-- Check the gear oil level. Refer to GEAR OIL, CHECKING LEVEL .

scientia non olet · About LEMON Manuals