Service Station, Connecting With A/C Adapter Set: VAG1786 To Refrigerant Circuit

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2017 Audi A3, and 2016 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

A - Connection with valve (small valve insert) on low-pressure side of refrigerant circuit

B - A/C Adapter Set - Adapter 1:VAG1786/1 .

C - Commercially available charging hose (short version with 5/8" thread on each end).

D - A/C Adapter Set - Adapter 2:VAG1786/2 (for connection of quick-release coupling of service station -E-).

NOTE:

Assemble the adapter and charging hose as shown and connect to connection with valve -A- first.

The A/C Adapter Set - Adapter 2:VAG1786/1 is only to be used at connections with "small" valve insert (standard for connection with valve for A/C Refrigerant Low Pressure Switch:F73 and gradually introduced as of 10.94 also at compressor).

Instead of the A/C Adapter Set - Adapter 1:VAG1786/1 , the A/C Adapter Set - Adapter 10:VAG1785/10 can also be used (remove valve from A/C Adapter Set - Adapter 10:VAG1785/10 or install valve opener in charging hose).