LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (EXHAUST SYSTEM, EMISSION CONTROLS (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 26 Exhaust System, Emission Controls >> Emissions Control System >> Exhaust Door Control Unit -J883-, Removing And Installing >> Installing

Exhaust Door Control Unit -J883-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA26-11403Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

NOTE:

Replace the nuts.

-- Bring the Exhaust Door Control Unit -J883- into the installation position.

scientia non olet · About LEMON Manuals