LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (CYLINDER HEAD, VALVETRAIN (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft, Removing And Installing >> Installing

Camshaft, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Additional procedures: 

-- Install the windshield washer fluid reservoir. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Install the ignition coils. Refer to IGNITION SYSTEM .

-- Install the upper coolant pipe. Refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals