LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (TURBOCHARGER, SUPERCHARGER [4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI] -- (A3 SEDAN)) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Removing

Charge Air Cooler, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .

-- Loosen the clamps -1 and 2- and remove the air duct hose.

GWWA21-10489Courtesy of AUDI OF AMERICA, LLC

-- Seal the open lines and connections with clean plugs from the :VAS6122  .

-- Unlock the retaining tab and remove the cover -1- toward the front.

GWWA19-11552Courtesy of AUDI OF AMERICA, LLC

-- Unclip the left and right air duct -2- downward in direction of -arrow B-.

GWWA19-11554Courtesy of AUDI OF AMERICA, LLC

-- Open the left and right retainers in direction of -arrow A- and disengage the condenser -3- from the charge air cooler -1-.

-- Secure the condenser to the lock carrier.

-- Remove the charge air cooler.