LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (CONTROLS, HOUSING [0D9] (2 Of 2) -- (A3 SEDAN)) >> 34 Controls, Housing >> Transmission Fluid Circuit >> Transmission Fluid Cooler, Removing And Installing >> Installing

Transmission Fluid Cooler, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replace the transmission fluid cooler bolts.

Replace the O-rings.

-- Check transmission fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING [For engine(s) CNSB, CNTC] .

scientia non olet · About LEMON Manuals