Selector Lever Transmission Range Position Display Unit -Y26-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Press the button on the electro-mechanical parking brake to activate it.
-- Move the selector lever into "D/S".
-- Turn off the ignition.
-- Carefully pry out the selector lever boot with the :T10383/1 on both sides in direction of -arrows- and then fold it upward.
-- Release the spring -2-, and remove the Selector Lever Transmission Range Position Display Unit -Y26- -1- upward in direction of -arrow-.
-- Disconnect the connector -3-.