5. Connectors On Selector Mechanism, Checking
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Before inspection of the connections, check all control devices in the vehicle for entries on their event log Vehicle Diagnostic Tester, Guided Fault Finding . If applicable, correct any faults.
-- Checking the connections. Refer to the Appropriate Systems Wiring Diagram.
- Electrical connector for connections from the function unit of the switch mechanism to the transmission (with CAN lines) and to the Shift Lock Solenoid -N110- and Selector Lever Park Position Lock Switch -E319-.
- Connector for Selector Lever Transmission Range Position Display Unit -Y26-.